JINAN UPGOAL MECHANICAL EQUIPMENT CO.,LTD
济南达高机械设备有限公司
Woodworking CNC Router
Woodworking CNC Router
Aluminum Plastic Plate CNC Cutting Machine with Vacuum Table 1300*2500MM 4*8Feet

Brief Introduction:

Model: UG-1325
1300*2500mm/4*8feet
Vacuum table with 5.5kw air blower
Dust collector
DSP offline controller

INQUIRY NOW

Applications

Woodworking products, advertising signs, MDF board, cutting engraving Photo frame, sculpture the sofa and the head of a bed, All kinds of wood door carvings, Large furniture relief engraving, Dalle hollow out  and simple copper aluminum plastic board, etc.


Features

1.Strong welded steel tube structure as a whole with vibration Temper aging treatment ensures no deformation for long time.

2. Imported Hiwin, Taiwan Linear square guide rail with ball bearing slide block which ensure high weight capacity,  high precision, smooth and steady running. Adopt imported precision ball screws, tools feeded with more accuracy.

3. Large power China HQD 3.2kw water cooling spindle which is with stable performance, lower noise, powerful and high torque, matched with high-performance frequency inverter.

4. China famous Chuangwei 86BYGH450B stepper motor and Leadshine driver DMA860H for XYZ-axis,  high precision, fast speed and more stable, dual motor Driven Y axis with traveling speed up to more than 25000mm/min.

5. Helical gears pinion and rack transmission for X and Y axis, higher running speed and efficiency, saving cost. Z- axis with precision ball screw, high precision and more durable.

6. RichAuto DSP A offline control system with USB interface which is completely off from Computer. More Humanizeddesign with Simple and Convenient Handle type operation.With per-calculation rule, fully excavating potentialities of motors. Enable high processing speed, synchronization of Curve and straight line, more perfect curve working and Spindle start up and stop automatically.

7. Vacuum adsorption system with 5.5kw air cooling vacuum pump,  vacuum table which is divided into 6 zones,also with aluminum alloy T slot, can adsorb different size materiel from small to big, , saving materials load-unloaded time.

8. Dust collector, sucking the dust, saw dust, milling dust, keeping the machine clearning.

9. Auto lubrication system more convenient for maintenance. 

10. Semi-auto tool calibration, more convenient for each time Z-axis 0 point setting.

11. Favorable compatibility with various CAM softwares such as Type3/Artcam/Mastercam/Caxa. With intelligent over limit protection function which can stop the mechanical collision due to unproper size given to the design.

12. With the function of Break-point memory ,power failure resuming and automatic home/orgin correction function, effectively ensure long time working precision.

600 900 透明水印-描边蓝色2.jpg

Effective working area

1300(X)mm*2500(Y)mm*200(Z)mm

Materials

Strong welded square steel tube structure

Working table

Vacuum table with aluminum alloy T slot 

working table

Moving type

Gantry moving

Guide rail

Linear square guide rail ( Hiwin, Taiwan)

Transmission

Helical rack &pinion for X Y -axis, Lead ball screw for Z-axis

Driving mode

Stepper motor (CW,86BYGH450B) and driver( Leadshine DMA860H) for XYZ-axis

Spindle motor

3.2kw, water cooling

Spindle speed

0-24000rpm

Collets type

ER20

Inverter

Sunfar/Fuling

Voltage

AC 220V+ 10%, 50/60Hz, single phase or

AC 380V+ 10%, 50/60Hz, three phases

Traveling speed

>25000mm/min

Engraving speed

>12000mm/min

Machine accuracy

0.03mm

Control system

DSP offline, A11E, 3 axis, RichAuto

Suitable software

Artcam, Type3, Ucancam V9,etc

Carving Instructions

G code *Uoo *mmg *plt HPGL

Running environment temperature

0-45 ℃

Relative humidity

30%-75%

Dust collector

3.0KW, double bags

Lubrication system

Semi-auto

Tool calibration

Auto

Certificate

CE


made in China 描述2.jpg

   

Inquiry now