Metal Non Metal Laser Cutting Machine
Metal Non Metal Laser Cutting Machine
New Economic Two Heads Metal Non-Metal Co2 Laser Cutting Engraving Machine with RD6445G Controller

Brief Introduction:

Model: UG-1390ML-2
Economic two head metal and non-metal Co2 laser
Reci W6 130W & Reci W2 90W Co2 laser tube
Metal cutting ability1.2mm
RDC6445G controller
RDworks V8 software



Applied to a certain of metal and non-metal materials Professional engraving/cutting such as stainless steel,carbon steel,wood,organic glass,plastic, cloth.

Widely used in the industry of Advertising, craft gift, shose, toys, garment, model, construction, package, paper and computerized embroidery &lipping.


1.Welding machine bed with quenching treatment to remove away the stress .Milled by Large precision gantry milling machine ensured the accuracy.  

2.Equipped with economic metal&non-metal cutting head. Stainless steel, carbon steel, acrylic and wood can be cut.

Laser head A1: with Reci W6 130W Co2 laser tube, mainly used for thin 1.2mm thickness stainless steel/steel cutting & thick non-metal cutting, laser head A2: with Reci W2 90W Co2 laser tube, used for non-metal precision engraving 

3. Famous Reci brand sealed Co2 laser tube, strong cutting ability and long working life.

4. Adopting imported focus lens with high luminous and mirror with high relativity ensure stable power transference and laser beam consistency.

5. Working Table: double working table and auto lifting table

Honey Comb Table: applicable to various soft materials with Good adsorption effect and low reflection ratio.

Knife Strips: With oxidation treatment and low reflection ratio ensured cutting quality

Auto Lifting Table:Maximum Loading 50kgs with 200mm up-down distance.

6.Motion System: Imported High precision, low friction force and stand wear and CSK Taiwan linear square guide rail and blocks with 3M belt ensured stable transmission, lower noise

7.Rationalized placement of the electronic parts. Optimized heat dissipation effect. Ensured system stability and anti jamming capability.

8.With advanced embedded  RuiDa RDC6445G(EC) real-time economic metal & non metallaser cutting engraving control system, running faster, laser intensity and speed automatic matching, perfectly realized the consistency of the corner cutting effect high strength cutting table, applicable for metal and non-metal cutting.

9.Industrial water chiller CW-5202 is equipped to ensure the machine can work last long time.

Effective working area of each laser head


Laser Type

Co2 sealed-off laser tube

Laser tube power

A1: W6 series, Reci, Beijing

(Rated power: 130W, max. Power: 160W)

A2: W2 series, Reci, Beijing

(Rated power: 90W, max. Power: 100W)

Working table

Double working table:honey comb and strip knife

Auto lifting table

Up and down 200mm automatically

Driver mode

3 phases stepper motor and Driver, Yako brand

Guide rail

Linear square guide rail ( CSK,Taiwan)


Belt transmission

Control panel


Laser output control

1-100% software setting

Engraving speed


Cutting speed


Control system

RuiDa RDC 6445G(EC)

Control software

RDworks V8

Design software when delivery


Control panel

DSP offline

Resolution accuracy

< 0.01mm

Location precision

< 0.01mm

Highest scanning accuracy


Type of cooling

Industrial chiller, CW-5202 cooling for dual head

Water protection system


Oxygen control system


Blow-off system

Air pump(138W) and air blower(550W)

Working temperature

0-45 °C

Operating humidity

5-95% (without condensed water)

Supporting picture format



AC 220V/110V, 50/60Hz, single phase



made in China 描述.jpg


Inquiry now