JINAN UPGOAL MECHANICAL EQUIPMENT CO.,LTD
济南达高机械设备有限公司
4 Axis CNC Router
4 Axis CNC Router
Large 4 Axis Rotary Axis 3D Woodworking CNC Router Engraving Cutting Machine with DSP A18E Controller

Brief Introduction:

Model: UG-2029
Flat working area 2000*2900mm
Independent removable rotary axis holder
Rotary clamping diameter 320mm, length 2900mm
DSP A18E 4 axis offline control
5.5kw water cooling spindle
Vacuum adsorption table

INQUIRY NOW

Applications

Woodworking products, advertising signs, MDF board, cutting engraving Photo frame, sculpture the sofa and the head of a bed, All kinds of wood door carvings, Large furniture relief engraving, Dalle hollow out  and simple copper aluminum plastic board, etc.


Features

1.Strong welded square steel tube structure as a whole with vibration Temper aging treatment ensures no deformation for long time.

2.Imported Hiwin, Taiwan Linear square guide rail with ball bearing slide block which ensure high weight capacity,  high precision, smooth and steady running. Adopt imported precision ball screws, tools feeded with more accuracy.XINYUE helical gears pinion and rack transmission for X and Y axis, higher running speed and efficiency, saving cost. Z- axis with precision ball screw, high precision and more durable.

3. Large power 5.5kw water cooling spindle which is with stable performance, lower noise, powerful and high torque, matched with high-performance frequency inverter.

4. China famous Chuangwei CW-86BYGH450B stepper motor for XYZ-axis, 86BYGH450C stepper motor for rotary axis and Leadshine DMA860H stepper driver,  high precision, fast speed and more stable, dual motor Driven Y axis with traveling speed up to more than 25000mm/min.

5. Extended gantry & independent removable rotary axis holder, with diameter 320mm, working length 2900mm, cylinder processing is in a special zone, each time, no need put the heavy rotary axis on the working table, saving labor and improving working efficiency. 

6. Vacuum adsorption system with 7.5kw air cooling vacuum pump,  vacuum table which is divided into 6 zones,can adsorb different size materiel from small to big, saving materials load-unloaded time.

7. RichAuto DSP A18E 4 axis offline control system with USB interface which is completely off from Computer. More Humanized design with Simple and Convenient Handle type operation.With per-calculation rule, fully excavating potentialities of motors. Enable high processing speed, synchronization of Curve and straight line, more perfect curve working and Spindle start up and stop automatically.

8. With dust collector, 5.5kw, double bags, sucking dust, milling dust, saw dust, keeping machine cleaning.

9. Semi-auto lubrication system,more convenient for maintenance. 

10. Auto tool calibration, more convenient for each time Z-axis 0 point setting.

11. Favorable compatibility with various CAM softwares such as Type3/Artcam/Mastercam/Caxa. With intelligent over limit protection function which can stop the mechanical collision due to unproper size given to the design.

12. With the function of Break-point memory,power failure resuming and automatic home/origin correction function, effectively ensure long time working precision.

600 900 透明水印-描边蓝色2.jpg

Effective working area

2000(X)mm*2900(Y)mm*300(Z)mm

4th axis

Independent & removable, diameter 320mm, working length 2900mm,

reduction gear type rotary axis

Materials

Strong welded square steel tube structure

Working table

Aluminum alloy T slot

Moving type

Gantry moving

Guide rail

Linear square guide rail ( Hiwin, Taiwan)

Transmission

XINYUE Helical rack &pinion for X Y -axis, Lead ball screw for Z-axis

Driving mode

Stepper motor (Chuangwei, 86BYGH450B for XYZ-axis, 86BYGH450C for Z-axis) and Leadshine stepper driver  for XYZA-axis

Spindle motor

5.5kw water cooling,ER25

Spindle speed

0-24000rpm

Inverter

Fuling

Voltage

AC 380V±10%, 50/60Hz, three phases or

AC 220V±10%, 50/60Hz, single phase

Traveling speed

25000mm/min

Engraving speed

12000mm/min

Machine accuracy

0.03mm

Control system

DSP offline control system A18E, 4 axis, RichAuto

Cooling deviceStainless steel water slot cooling
Dust collector 5.5kw

Suitable software

Artcam, Type3, Ucancam V9,etc

Carving Instructions

G code *Uoo *mmg *plt HPGL

Running environment temperature

0-45 ºC

Relative humidity

30%-75%

Lubrication system

Semi-auto

Tool calibration

Auto

Certificate

CE


水印2DDDDDDDDDDDDDDD2.jpg

made in China 描述2图.jpg

Inquiry now